[Planetlab-devel] IPv6 support for MyPLC

[Bound, Jim]

Rick, 

OK yes v6 makes that much better.

So are there multiple vservers per machine?

If you have a paper that explains how IP config is done I can go read
that too?  If answer is yes to the above next questions :--)

thx
/jim 

> -----Original Message-----
> From: McGeer, Patrick C 
> Sent: Tuesday, November 07, 2006 7:26 PM
> To: Bound, Jim; Marc E. Fiuczynski; devel at lists.planet-lab.org
> Subject: RE: [Planetlab-devel] IPv6 support for MyPLC
> 
> Jim,
> One of the problems that PlanetLab has is that we only have 
> one v4 address per machine (gee, think more address bits 
> would solve this problem?).  So the ugly choices are to share 
> the port space (which we're doing), or do some hideous on-box 
> NAT thing.
> 
> The cool thing about v6 (well, one cool thing about v6) is 
> that we can give each sliver (aka, each virtual machine) its 
> own v6 address.  So we haven't faced this issue in v4 because 
> v4 is too limited to give us the possibility.
> 
> -- Rick 
> 
> -----Original Message-----
> From: devel-bounces at planet-lab.org 
> [mailto:devel-bounces at planet-lab.org] On Behalf Of Bound, Jim
> Sent: Tuesday, November 07, 2006 3:35 PM
> To: Marc E. Fiuczynski; devel at lists.planet-lab.org
> Subject: RE: [Planetlab-devel] IPv6 support for MyPLC
> 
> How does it work with IPv4 today?  
> 
> I don't how the vserver configures its IP address and if it 
> uses an IPv6 implementation it must know node discovery thus 
> stateless could work.
> 
> DHCPv6 assumes their is a DHCPv6 client on the vserver?
> 
> /jim 
> 
> > -----Original Message-----
> > From: devel-bounces at planet-lab.org
> > [mailto:devel-bounces at planet-lab.org] On Behalf Of Marc E. 
> Fiuczynski
> > Sent: Tuesday, November 07, 2006 5:59 PM
> > To: devel at lists.planet-lab.org
> > Subject: [Planetlab-devel] IPv6 support for MyPLC
> > 
> > [This thread was on started on a separate mailing list. 
> I've shut down 
> > that mailing list and would like to continue on the devel mailing 
> > list.]
> > 
> > We are still plugging along on the required kernel fixes to 
> support a 
> > unique
> > IPv6 address per sliver (i.e., a vserver or virtual machine) on 
> > PlanetLab.
> > While this seems to be making happy progress, there are at 
> least two 
> > issues that we need to resolve for which it would be great to get 
> > feedback /
> > thoughts:
> > 
> > 1) What IPv6 address should be assigned to a sliver (static or 
> > autoconf'd)?
> > 
> > and
> > 
> > 2) How to get the IPv6 addresses assigned to slivers into DNS?
> > 
> > Marc
> > 
> > _______________________________________________
> > Devel mailing list
> > Devel at lists.planet-lab.org
> > https://lists.planet-lab.org/mailman/listinfo/devel
> > 
> 
> _______________________________________________
> Devel mailing list
> Devel at lists.planet-lab.org
> https://lists.planet-lab.org/mailman/listinfo/devel
>