[Planetlab-devel] bootcd_v3 for wireless/mesh myplc

[Marc E. Fiuczynski]

Hi Winson,

Here you go.

Marc


> -----Original Message-----
> From: devel-bounces at planet-lab.org
> [mailto:devel-bounces at planet-lab.org]On Behalf Of Chan, Winson C
> Sent: Monday, November 13, 2006 2:35 PM
> To: Marc E. Fiuczynski; devel at lists.planet-lab.org
> Subject: RE: [Planetlab-devel] bootcd_v3 for wireless/mesh myplc
> 
> 
> Marc,
> 
> Looks like I will have to use a specific kernel.  In the instructions
> below, you mentioned about the attached kupdate.sh file.  I don't see
> it.  Can you resend kupdate.sh to me?
> 
> Thanks.
> Winson
> 
> 
> -----Original Message-----
> From: devel-bounces at planet-lab.org [mailto:devel-bounces at planet-lab.org]
> On Behalf Of Marc E. Fiuczynski
> Sent: Tuesday, November 07, 2006 2:21 PM
> To: devel at lists.planet-lab.org
> Subject: RE: [Planetlab-devel] bootcd_v3 for wireless/mesh myplc
> 
> Hi Winson,
> 
> The attached script has replaces the bootcd kernel with a custom kernel.
> It
> assumes that you have built the kernel using Mark Huang's build module.
> 
> cvs -d :pserver:anonymous at cvs.planet-lab.org:/cvs co build
> cvs -d :pserver:anonymous at cvs.planet-lab.org:/cvs co bootmanager
> cd build
> 
> cp kupdate.sh . # this is the attached file
> # build a custom PL kernel as an RPM
> # I believe I've sent you instructions for this a while back
> 
> sudo ./kupdate.sh RPMS/i686/kernel-xxxxx.rpm
> # where xxxxx is the specific kernel that you want to install
> 
> sudo service plc start bootcd
> # you should now have a bootcd with your custom kernel.
> # If you've built special device driver modules, etc., they
> # will be part of the RPM and so will show up on the bootcd
> # already.
> 
> Hope this help.
> 
> Cheers,
> Marc
> 
> _______________________________________________
> Devel mailing list
> Devel at lists.planet-lab.org
> https://lists.planet-lab.org/mailman/listinfo/devel
> 
> _______________________________________________
> Devel mailing list
> Devel at lists.planet-lab.org
> https://lists.planet-lab.org/mailman/listinfo/devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: kupdate.sh
Type: application/octet-stream
Size: 933 bytes
Desc: not available
Url : http://lists.planet-lab.org/pipermail/devel/attachments/20061113/ad952aa7/kupdate.obj