[Planetlab-devel] RE: MyPLC on CentOS 5.4 x86_64 -vtest-init-vserver time out

[John Buford]

> 
> -----Original Message-----
> From: devel-bounces at planet-lab.org [mailto:devel-bounces at planet-lab.org]
On Behalf Of Thierry Parmentelat
> Sent: Tuesday, March 23, 2010 6:17 PM
> To: PlanetLab Development
> Subject: Re: [Planetlab-devel] RE: MyPLC on CentOS 5.4 x86_64
-vtest-init-vserver time out
> 
> Not sure i'm following here
> IIUC you're trying to create a vserver to run a myplc inside, right ?

yes

> why would you have a myplc.repo in the root context at all ?

Looks like I mis-read the wiki instructions. Now I see that
the manual config for yum.repos.d/myplc.repo is in the vserver context.
Thanks.

> 
> as far as /etc/vservers, here's what I have in my test host; (it's an f12
box but that's irrelevant) if you've used the helper script in
build/mirroring/mirror.sh you should have just the same with your own mirror
instead

Yes mine is the same except that the baseurls point to the local mirror

Ok, using your version and also removing /etc/yum.repos.d/myplc.repo
I am still getting GPG key retrieval failed with connection timed out

> 
> 
> 
> root at warhol /etc/vservers/.distributions/centos5/yum.repos.d # cat
building.repo # # $Id: building.repo.in 16215 2009-12-16 15:00:57Z thierry $
# $URL:
http://svn.planet-lab.org/svn/build/trunk/mirroring/centos5/yum.repos.d/buil
ding.repo.in $ # [base] name=CentOS 5.4 - $basearch - Base
baseurl=http://mirror.onelab.eu/centos/5.4/os/$basearch/
> gpgcheck=1
> gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5
> 
> [updates]
> name=CentOS 5.4 - $basearch - Released Updates
baseurl=http://mirror.onelab.eu/centos/5.4/updates/$basearch/
> gpgcheck=1
> gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5
> 
> [epel]
> name=Extra Packages for Enterprise Linux 5 - $basearch
baseurl=http://mirror.onelab.eu/epel/5/$basearch/
> gpgcheck=1
> gpgkey=http://download.fedora.redhat.com/pub/epel/RPM-GPG-KEY-EPEL
> 
> 
> 
> 
> 
> On Mar 23, 2010, at 10:07 PM, John Buford wrote:
> 
> > Also, gpgcheck=0 in /etc/yum.repos.d/myplc.repo and in 
> > /etc/vservers/.distributions/centos5/yum.repos.d/building.repo
> > 
> > Thanks,
> > John
> > 
> > -----Original Message-----
> > From: John Buford [mailto:buford at samrg.org]
> > Sent: Tuesday, March 23, 2010 4:29 PM
> > To: devel at lists.planet-lab.org
> > Cc: 'John Buford'
> > Subject: MyPLC on CentOS 5.4 x86_64 - vtest-init-vserver time out
> > 
> > 
> > My node has CentOS 5.4 x86_64 installed.
> > 
> > I have set up a local mirror of f8 and got to the stage where I ran:
> > 
> > ./vtest-init-vserver.sh -f f8 -d planetlab -p linux32 vtest32 
> > http://build.planet-lab.org/planetlab/f8/pl-f8-i386-4.3-k22-latest/RPM
> > S/ -- --interface eth0:10.40.120.147 --hostname vnode01.samlab.org >& 
> > vtest32.log &
> > 
> > I received error message in the log:
> > "GPG key retrieval failed ... Connection timed out"
> > 
> > Thanks
> > John
> > 
>