[Fwd: Re: =?iso-8859-1?Q?RE:_[Planetlab-users]_Probl=E8me_with_CoDeploy, _Stork, _and?= PlMan]

[Faiyaz Ahmed]

-------- Original Message --------
Subject: 	Re:
=?iso-8859-1?Q?RE:_[Planetlab-users]_Probl=E8me_with_CoDeploy, _Stork,
_and?= PlMan
Date: 	Mon, 23 Jun 2008 12:37:29 -0400
From: 	Faiyaz Ahmed <faiyaza at cs.princeton.edu>
To: 	Sedayao, Jeff <jeff.sedayao at intel.com>
References:
<68455b140806230706q5e63a5a1gefd96815a5067a4d at mail.gmail.com>
<A6AD88C3F2289247BE726C37303E1EB80616F8BE at orsmsx505.amr.corp.intel.com>



Hi Jeff,

PlanetLab 4.2 now uses the "initscript" slice attribute with the value
set to the desired initscript's name.

I've converted all existing plc_initscript_id slice attributes to
"initscript" and set their value to the corresponding name on PLC.  You
should notice both the old attribute "plc_initscript_id" as well as the
new one "initscript" if your slice was previously setup to use
initscripts.  This is to allow nodes which haven't been upgraded to 4.2
yet to continue to support slice initscripts.

This should take care of the issue.  Please let me know if you notice
anything amiss.


Faiyaz


On Jun 23, 2008, at 10:28 AM, Sedayao, Jeff wrote:

> I noticed stork problems too.  A note was sent to the developers list 
> - not sure if a support ticket was opened.
>  
> Jeff Sedayao
> Intel Corporation
>
>     ------------------------------------------------------------------------
>     *From:* users-bounces at planet-lab.org
>     [mailto:users-bounces at planet-lab.org] *On Behalf Of *yassine benmoussa
>     *Sent:* Monday, June 23, 2008 7:06 AM
>     *To:* users
>     *Subject:* [Planetlab-users] Problème with CoDeploy, Stork, and PlMan
>
>     Hi,
>     I dont know if some one had some problems with : CoDeploy, Stork,
>     and PlMan. I run them and there is no problem, but when i wanna
>     use them, ad i verified i found nothing does. For exemple Stork, i
>     run it without problem, when i want to install  JVM on my Slice's
>     nodes, i clicked on synchronized, and it tell me that the
>     synchronization is finished, but when i verfied if JVM is
>     installed or not, i found nt
>     For PlMan, I run it without problem, i follow the same steps as
>     explained on their sites, but when i choosed nodes to connect
>     with, it does nothing and it still blocked.
>     And Im asked how can we used CoDeploy, and if we can use it to
>     deploy and execute and stop, with out installing any http server
>     (the server is for the second argument of CoDeploy, and its the
>     directory which contains the file that we want to Depoy )
>
>     PS : Iam attached to PlanetLab europe, so if someone had the same
>     problem, and he had at first the problem of the authentification
>     please ansewer me on this thread
>
>     -- 
>     BENMOUSSA Yassine
>     3ème année INPT
>     benmoussa.yassine at gmail.com <mailto:benmoussa.yassine at gmail.com>
>
>     P please consider the environment - do you really need to print
>     this email? 
>
> _______________________________________________
> Users mailing list: Users at lists.planet-lab.org 
> <mailto:Users at lists.planet-lab.org>
> https://lists.planet-lab.org/mailman/listinfo/users